A collection of quick-grab tools built by a mixer, for mixers.

MICROPHONE PHASE & COMB FILTER CALCULATOR

Calculate microphone arrival-time differences, sample offsets, and comb-filter cancellation frequencies from acoustic path-length differences.

COMB FILTER NULLS

COMB FILTER RESPONSE

dB
Comb filter response normalized to maximum reinforcement

Idealized coherent signals · Response normalized to maximum reinforcement (0 dB).

UNDERSTANDING COMB FILTERING

When two microphones capture the same source at different arrival times, their signals can reinforce or cancel each other at different frequencies. This creates the repeating peaks and notches known as comb filtering.

Moving a microphone changes the notch frequencies. Changing the relative signal levels changes their depth. EQ generally cannot fully correct cancellation between the signals.

This graph assumes coherent signals with identical frequency responses. Different microphones, source positions, polar patterns, and reflections produce more complex results.

ABOUT THIS TOOL

The Microphone Phase & Comb Filter Calculator converts differences in microphone distance, arrival time, and sample offsets into useful timing references. It also calculates comb-filter cancellation frequencies and displays an idealized frequency response.

Recording a source with multiple microphones and hearing unexpected tonal changes when combining them? Use the calculator to investigate how arrival-time differences can produce cancellations and reinforcement at different frequencies. Whether you're recording drums, acoustic guitar, or another source, it can help you understand the relationship between microphone placement and comb filtering.

Want to experiment with time-aligning microphones in your DAW? Use the calculated sample offset to shift the later-arriving signal earlier on the timeline, or apply an equivalent delay to the earlier-arriving signal. Many DAWs allow you to make these adjustments through sample-level editing or track delay controls. Listen to the microphones together while making adjustments, as perfect time alignment doesn't necessarily produce the best sound. Be mindful that shifting one track can change its timing relationship with other microphones in the session.

Sound travels at approximately 343 meters per second at room temperature. Using this reference, the calculator converts distance differences into milliseconds and samples at 44.1, 48, or 96 kHz. When two similar signals are combined with a time offset, certain frequencies reinforce while others cancel. The first destructive null occurs at half the reciprocal of the arrival-time difference, with additional nulls at odd multiples of that frequency.

The Comb Filter Response graph illustrates how the frequency response changes with arrival-time differences and relative signal levels. Greater level differences generally produce shallower cancellations.

These calculations describe idealized relationships, not exact predictions of a real recording. Microphone polar patterns, frequency responses, reflections, source geometry, and other factors influence the actual result.

Understanding Microphone Phase & Comb Filtering

Whenever two or more microphones capture the same sound source, the relationship between those signals becomes important. Differences in microphone position, distance, and arrival time can create phase interactions that change the sound when the signals are combined.

Sometimes those interactions are desirable. Other times, they can cause cancellations, exaggerated frequencies, or a noticeable loss of clarity.

Understanding how distance and time affect phase relationships can help explain what you're hearing and make microphone placement decisions more intentional.

How Distance Affects Phase

Sound takes time to travel through air. When two microphones are placed at different distances from a source, the sound arrives at each microphone at slightly different times.

That difference in arrival time creates a phase offset that varies with frequency.

For example, a difference of approximately 1 foot in distance corresponds to about 0.9 milliseconds of delay under typical room conditions.

At some frequencies, the two signals will reinforce one another. At others, they'll partially or completely cancel when combined.

The effect depends on the frequency, arrival-time difference, relative level, and polarity of the signals.

It's important to remember that phase relationships are frequency-dependent. Two microphones aren't simply "in phase" or "out of phase" across the entire frequency spectrum because one is farther away than the other.

Understanding Comb Filtering

Comb filtering occurs when two versions of the same signal are combined with a time offset between them.

The resulting frequency response contains a repeating pattern of peaks and cancellations, resembling the teeth of a comb.

For two equal-level copies of a signal with the same polarity, the first cancellation occurs when the path-length difference equals half a wavelength. Additional cancellations occur at odd multiples of that frequency.

As an example, a 1-foot path-length difference produces a first cancellation near 565 Hz, with additional notches at approximately 1,695 Hz, 2,825 Hz, and so on.

These calculations assume ideal conditions. In real recording situations, microphone frequency responses, off-axis coloration, source directivity, reflections, and differences in signal level all affect how pronounced the cancellations become.

The important takeaway is that even relatively small changes in microphone position can substantially change the combined frequency response.

Practical Microphone Placement

Phase relationships are worth considering anytime multiple microphones capture the same source.

A few common examples include:

Snare Top and Bottom

When capturing both the top and bottom of a snare drum, you'll never achieve perfect phase alignment across the entire frequency spectrum. The microphones are capturing different aspects of the drum, and their signals often have opposite initial polarity because the drumheads move in opposing directions.

Combining the two microphones will almost always involve some degree of frequency cancellation. You might lose a little low end, some high end, or something in the midrange—often a bit of all three.

While it's best to use your ears to find the sweet spot during tracking, you can always nudge one of the signals around a bit in post. The calculator provides a useful reference for understanding how much time or distance you're adjusting and how that affects the phase relationship.

Flipping polarity on one microphone can also help produce a fuller, more focused sound, but it's not automatically the right choice. Ultimately, the goal isn't perfect mathematical alignment. It's finding the combination that sounds best for the recording.

Kick In and Out

Inside and outside kick microphones capture different perspectives of the same instrument. Their distance from the beater and resonant head creates arrival-time differences, while the microphones themselves may emphasize very different frequency ranges.

Adjusting placement, polarity, or time alignment can significantly change the low-frequency response and perceived attack.

Spaced Microphones

Spaced pairs and other multi-microphone configurations can produce a sense of width and depth through arrival-time differences.

Those same differences can create cancellations when the signals are combined in mono.

That doesn't necessarily mean the placement is wrong. Stereo width, tonal balance, and mono compatibility all need to be considered together.

Polarity vs. Phase

Polarity inversion and phase adjustment are often discussed interchangeably, but they're not the same thing.

A polarity switch reverses the positive and negative excursions of a waveform. In other words, it flips the entire signal vertically.

Changing microphone distance or applying a time delay changes the phase relationship between two signals as a function of frequency.

A polarity inversion can improve how two microphones combine, but it doesn't correct the underlying arrival-time difference.

Likewise, time-aligning two signals doesn't guarantee that they'll reinforce each other across the frequency spectrum.

Both are useful tools, but they solve different problems.

Time Alignment: When It Helps and When It Doesn't

Modern DAWs make it easy to move recorded signals by samples or milliseconds, and time-alignment plugins can perform similar adjustments automatically.

This can be useful for close microphones on a drum kit, particularly when the goal is to improve transient coherence or low-frequency reinforcement.

But perfectly aligning every microphone isn't necessarily desirable.

Room microphones, overheads, and spaced stereo pairs often derive part of their character from differences in arrival time. Removing those differences can change the depth, width, or sense of space that made the microphone configuration appealing in the first place.

It's also worth considering that a microphone can only be time-aligned perfectly to a particular arrival path or event. Reflections, multiple sound sources, and the physical dimensions of an instrument create a more complicated picture.

Use alignment when it improves the sound, not simply because the waveforms don't line up.

What About the 3:1 Rule?

The 3:1 rule is a common guideline for reducing unwanted interactions between microphones recording separate sources.

In its traditional form, the distance between microphones should be at least three times the distance from each microphone to its intended source.

For example, if a microphone is placed 1 foot from an instrument, the guideline suggests keeping it approximately 3 feet from another microphone recording a different instrument.

The idea is to reduce the level of unwanted sound reaching the other microphone, making phase interactions less noticeable when the signals are combined.

It's a useful starting point, but it's not a guarantee against comb filtering, and it doesn't directly apply to every multi-microphone technique.

The 3:1 rule is best understood as a guideline for managing bleed, not a universal microphone placement requirement.

Use the Calculator, Then Listen

The Microphone Phase & Comb Filter Calculator provides a way to examine the mathematical relationships between distance, delay, frequency, and phase.

It's particularly useful for understanding where cancellations may occur and how changes in microphone placement affect those relationships.

But real recordings are more complicated than two perfectly correlated signals arriving at different times.

The calculator can't account for every reflection, microphone polar pattern, or interaction between instruments in a room.

Use the numbers to understand what might be happening, then make the final decision by listening to the microphones together.

A technically perfect alignment isn't necessarily the best-sounding microphone placement.

← ALL CALCULATORS